I want to search for...

Business Name

Contractor Name

Contractor Type

Status

Date From

By Permit Number

By Address

By Contractor

By Date Range

By Permit Type

By Parcel Number

By COED

Date From

Date To

Date To Search

Status

Permit Type

Date From

Date To

Date To Search

Permit Type

Date From

Date To

Date To Search

Permit Type

By Permit Number

By Address

Permit #2012030149

Parcel Id: 41-11-31-4975-00000-0010
Block: 00000
Subdivision: 1155 - PALM HARBOR SHOPPING VILLAGE
Job Phone: 904-899-0220
Location Address: 216 PALM COAST PKWY NE
Type: CM - COMMERCIAL MECHANICAL
Issue Date: 03/13/2012
NOC: Unknown
Applicant name: JAMES CURTIS OAKLEY
Owner: MCW-RC-FL-PALM HARBOR LLC C/O PROPERTY TAX DEPT
Address PO BOX 9271 OAK BROOK, IL 60522
Lot: 0010
Contracted Stated Job Value: ¤7,461.00
Job Description: REPLACE EXISTING 5 - TON HVAC SPLIT SYSTEM SEERS 13
Type: CN

Status	Location Address	State License Number	Phone	Fax
CANCEL	150 MARITIME DR SANFORD, FL 32771	CAC1814582 (Exp: 08/31/2022)	904-899-0220	904-899-0224

Type	Request Date	Result	Inspector
HVAC FINAL	08/24/2012	FINAL APPROVED	CMINI
Note: THIS IS A REINSPECTION
HVAC FINAL	07/10/2012	Disapproved -FEE REQUIRED	RMARVEL
Note: Inspection Resulted at 7/10/2012 2:51:14 PM NEED PERMIT AND PAPERWORK POSTED FOR INSPECTION. WILL NEED CONTRACTOR PRESENT WITH A LADDER.

Department	Status	Date In	Date Out
MECH	COMPLETE	03/12/2012	03/12/2012
MECH	HOLD	03/09/2012	03/09/2012
Note: Provide the minimum efficiency of the hvac equipment units to be installed.
BLD	COMPLETE	03/09/2012	03/09/2012
BLD	HOLD	03/06/2012	03/06/2012
Note: 1. Provide plan showing the location of the hvac system equipment unit/units to be replaced. 2. Provide tie-down unit equipment detail.
MECH	HOLD	03/06/2012	03/06/2012
Note: 1. Specify which hvac system unit to be replaced as there are 4 existing units with different capacities. 2. Provide cut sheets and specifications including but not limited to electrical requirements, efficiency, cooling/heating capacity, and model number. 3. If there would be changes in electrical requirements, provide electrical contractor doing the job and provide electrical riser diagram showing the wire sizes, type of wire and require grounding. The diagram shall include the signature and license number of the elctrical contractor.