I want to search for...

Permit #2014080191

Permit Details

Status: FINAL

Parcel Id: 07-11-31-7023-00010-0060
SCREEN PORCH (SOLID ROOF) : 364 sqft
CONDITIONED SPACE: 145 sqft
Total Square Footage: 509 sqft
Block: 00010
Subdivision: 2191 - SECTION 23-WYNNFIELD
Job Phone: 386-447-2202
Location Address: 29 WHIRLAWAY DR
Type: BA - BUILDING ADDITION
Issue Date: 09/23/2014
NOC: Unknown
Applicant name: MICHAEL J LILLY
Owner: SCHULTZ-CLARK DEBORAH & KENNETH B

Address

29 WHIRLAWAY DRIVE

PALM COAST, FL 32137
Lot: 0060
Contracted Stated Job Value: ¤2,100.00
Job Description: SCREEN ENCLOSURE & PORCH
Type: CN

Contractor

SERVPRO OF FLAGLER COUNTY
Status Location Address State License Number Phone Fax
INACTIVE

2205 DOBBS ROAD

BUNNELL, FL 32110

 CGC1514660 (Exp: 08/31/2024) 904-429-4457 386-206-2188

Inspection History

Type Request Date Result Inspector
BLD - BUILDING FINAL 11/12/2014 FINAL APPROVED JCOLASANTI
INSULATION 10/24/2014 APPROVED JCOLASANTI
LATH/BRICK/ WATER BARRIER 10/24/2014 APPROVED JCOLASANTI
WALL SHEATHING 10/21/2014 APPROVED JCOLASANTI
ALL ROUGH 10/17/2014 APPROVED JCOLASANTI
FOUND SURVEY APPROVED (OFFICE) 10/16/2014 CANCELLED BY APPLICANT BBEMBRY
FOUND SURVEY APPROVED (OFFICE) 10/16/2014 APPROVED JHINDMAN
Note: THIS IS A REINSPECTION
MONOLITHIC SLAB 10/01/2014 APPROVED JCOLASANTI
Note: per contractor

Review History

Department Status Date In Date Out
SW1 COMPLETE 10/16/2014 10/16/2014
Note: Released By: JHINDMAN foundation s
BLD COMPLETE 09/15/2014 09/22/2014
BLD HOLD 09/09/2014 09/10/2014
Note: 1. Provide an electrical layout. 2010 FBC 107.1 107.2.1. 2. Provide screen room height dimension. 2010 FBC 107.2.1. 4. Identify the rooms that the new infilled porch encloses. 2010 FBC 107.2.1. 5. Provide Florida energy efficiency short form.(for the new room that you are enclosing). 6. Identify the infill wall type on page 4 that is going to be used. (the wall type cannot be optional). 2010 FBC 107.3.5. 7. Provide the footing detail for the infilled porch. 2010 FBC 107.3.5. 8. If wall is frame provide lath, stucco and side wall anchorage details. 2010 FBC 107.3.5. 9. Provide a stucco finish that complies with Astm C 926. J. Hindman 986-3784 Thi is the 3nd request for these items. A permit cannot be issued until the above items has been addressed.
BLD HOLD 09/04/2014 09/08/2014
Note: 1. Provide an electrical layout. 2010 FBC 107.1 107.2.1. 2. Provide screen room height dimension. 2010 FBC 107.2.1. 3. Provide 130 mph design windspeed. 2010 FBC 107.2.1. 4. Identify the rooms that the new infilled porch encloses. 2010 FBC 107.2.1. 5. Provide Florida energy efficiency short form.(for the new room that you are enclosing). 6. Identify the infill wall type that is going to be used. (the wall type cannot be optional). 2010 FBC 107.3.5. 7. Provide the footing detail for the infilled porch. 2010 FBC 107.3.5. 8. If wall is frame provide lath, stucco and side wall anchorage details. 2010 FBC 107.3.5. 9. Provide a stucco finish that complies with Astm C 926. J. Hindman 986-3784 2nd request.
ZON COMPLETE 09/04/2014 09/05/2014
BLD HOLD 08/18/2014 08/18/2014
Note: 1. Provide an electrical subcontractor and an electrical layout. 2010 FBC 107.1 107.2.1. 2. Provide screen room height dimension. 2010 FBC 107.2.1. 3. Provide 130 mph design windspeed. 2010 FBC 107.2.1. 4. Identify the rooms that the new infilled porch encloses. 2010 FBC 107.2.1. 5. Provide Florida energy efficiency short form.(for the new room that you are enclosing). 6. Identify the infill wall type that is going to be used. (the wall type cannot be optional). 2010 FBC 107.3.5. 7. Provide the footing detail for the infilled porch. 2010 FBC 107.3.5. 8. If wall is frame provide lath, stucco and side wall anchorage details. 2010 FBC 107.3.5. 9. Provide a stucco finish that complies with Astm C 926. J. Hindman 986-3784
ZON HOLD 08/18/2014 08/18/2014
Note: 1.Correct exterior elevations to depict proposed screen room exterior and material. 2. Provide height and thickness of kick plate material. If the aluminum kick plate is greater than .024 and has 3” insulated panels, the exterior of the “screen room addition” must be compatible with that of the host structure; ie; pitched roof with shingles, exterior finish and color of walls.
BLD HOLD 08/11/2014 08/11/2014
Note: 1. Provide an electrical subcontractor and an electrical layout. 2010 FBC 107.1 107.2.1. 2. Provide Florida product approval for the door and window. 2010 FBC 107.2.1. 3. Provide screen room height dimension. 2010 FBC 107.2.1. 4. Provide 130 mph design windspeed. 2010 FBC 107.2.1. 5. Identify the rooms that the new infilled porch encloses. 2010 FBC 107.2.1. 6. Provide Florida energy efficiency short form. 7. Identify the infill wall type that is going to be used. (the wall type cannot be optional). 2010 FBC 107.3.5. 8. Provide the footing detail for the infilled porch. 2010 FBC 107.3.5. 9. If wall is frame provide lath, stucco and side wall anchorage details. 2010 FBC 107.3.5. 10. Provide a stucco finish that complies with Astm C 926. J. Hindman 986-3784.
SW1 COMPLETE 08/11/2014 08/11/2014
ZON HOLD 08/11/2014 08/11/2014
Note: 1.Correct elevations to depict proposed screen room exterior and material. 2.Provide height and thickness of kick plate material. If the aluminum kick plate is greater than .024 and has 3” insulated panels, the exterior of the “screen room addition” must be compatible with that of the host structure; ie; pitched roof with shingles, exterior finish and color of walls.

Fees & Payments

(Permit is not ready for pickup until the permit has been processed and fees appear)
Description Amount Due Date Paid
ADMIN FEE ¤20.00 09/23/2014
PLAN CHECK FEE ¤40.00 09/23/2014
SCREEN ENCLOSURE ¤80.00 09/23/2014
SITE PLAN 20 ¤20.00 09/23/2014
SURCHARGE FS 533.721 ¤2.00 09/23/2014
SURCHARGE - FS 468.631 ¤2.00 09/23/2014
STORM WATER PERMIT FEES ¤40.00 09/23/2014
Fees Total Due: ¤0.00 Total Paid: ¤204.00