I want to search for...

Permit #2024030826

Permit Details

Status: COED

Parcel Id: 07-11-31-7026-00480-0380
GARAGE: 592 sqft
OPENED PORCH (WITH ROOF) : 235 sqft
CONDITIONED SPACE: 1707 sqft
OPENED PORCH (WITH ROOF) : 42 sqft
Total Square Footage: 2576 sqft
Block: 00480
Subdivision: -
Job Phone: 386-931-4289
Location Address: 16 PIERCE LN
Type: BR - BUILDING RESIDENTIAL -SINGLE FAMILY
Issue Date: 05/10/2024
NOC: RECORDED
Applicant name: RICHARD M. ANDERSON
Owner: ANDERSON THOMAS R

Address

8 CARLOS COURT

PALM COAST, FL 32137

Lot: 0380
Contracted Stated Job Value: ¤300,000.00
Job Description: Single Family Residence
Type: CN

Contractor

PALM WEST HOME BUILDERS, INC.
Status Location Address State License Number Phone Fax
ACTIVE

2 Florida Park Drive North

Palm Coast, FL 32137

CRC054633 (Exp: 08/31/2026) (386) 445-7001 (386)446-5941

Sub Contractors

JOSEPH C WRIGHT
Status Location Address Mailing Address State License Number Phone Fax
ACTIVE

15 HARGROVE LANE

PALM COAST, FL 32137

UNIT 3 D

PALM COAST, FL 32137

EC13003278 (Exp: 08/31/2026) 386-447-9644 386-447-9633
GARY LLOYD SHEFFIELD
Status Location Address State License Number Phone
ACTIVE

48 EAGLE LAKES DRIVE

FLAGLER BEACH, FL 32136

CAC048127 (Exp: 08/31/2026) 386-597-3280
CHRISTOPHER DANIEL FULTON
Status Location Address Mailing Address State License Number Phone
ACTIVE

2 MARKET PLACE

PALM COAST, FL 32137

UNIT D

PALM COAST, FL 32137

CCC1331939 (Exp: 08/31/2026) 386-445-7945
GLEN WILLIAM KEHLE
Status Location Address State License Number Phone Fax
ACTIVE

P. O. Box 353511

BUNNELL, FL 32110

CFC057241 (Exp: 08/31/2026) (386) 447-4249 (386) 437-8488

Inspection History

Type Request Date Result Inspector
BLD - BUILDING FINAL 12/19/2025 FINAL APPROVED KSANDOE
Note: 12/17/2025 - PREVIOUS INSPECTION NOTES Please fix items before next inspection #1-Attic access need to be accesible ( lenum box and duct work bloking access )FBCR 807.1 #2-FBC [A] 107.4-MECHANICAL EQUIPMENT DOES NOT MATCH ENERGY CALCS #3-Missing light in attic ( house area ) #4-Missing hose bib backflow ( by meter electrical panel ) #5- all interior door need to be installed ( share bedroom closet ) #6-seall all penetration on garage walls ( Pipe by water heater )( water lines ) #7-Please removed one piece of sotfit for inspection R316.5.12 Sheathing. Foam plastic insulation used as sheathing shall comply with Section R316.3 and Section R316.4. Where the foam plastic sheathing is exposed to the attic space at a gable or kneewall, the provisions of Section R316.5.3 shall apply. Where foam plastic insulation is used as exterior wall sheathing on framed wa R316.5.3 Attics. The thermal barrier specified in Section R316.4 is not required where all of the following apply: 1. Attic access is required by Section R807.1. 2. The space is entered only for purposes of repairs or maintenance. 3. The foam plastic insulation has been tested in accordance with Section R316.6 or the foam plastic insulation is protected against ignition using one of the following ignition barrier materials: 3.1. 11/2-inch-thick (38 mm) mineral fiber insulation. 3.2. 1/4-inch-thick (6.4 mm) wood structural panels. 3.3. 3/8-inch (9.5 mm) particleboard. 3.4. 1/4-inch (6.4 mm) hardboard. 3.5. 3/8-inch (9.5 mm) gypsum board. 3.6. Corrosion-resistant steel having a base metal thickness of 0.016 inch (0.406 mm). 3.7. 11/2-inch-thick (38 mm) cellulose insulation; or 3.8. 1/4-inch (6.4 mm) fiber-cement panel, soffit or backer board. The ignition barrier is not required where the foam plastic insulation has been tested in accordance with 5/5/25: Entire Roof Deck is covered with Foam insulation. The required coating has been applied where required. Visually verified during inspection 2490 - Insulation.
WATER METER INSTALLATION REQUEST 12/19/2025 APPROVED CBOWERMASTER
U -UTILITY RESIDENTIAL FINAL 12/18/2025 FINAL APPROVED BHAINES
Note: Inspector Notes from Inspection 9035 No CC, No IRR
BLD - BUILDING FINAL 12/17/2025 Disapproved -FEE REQUIRED CVANSTRAHLEN
Note: Please fix items before next inspection #1-Attic access need to be accesible ( lenum box and duct work bloking access )FBCR 807.1 #2-FBC [A] 107.4-MECHANICAL EQUIPMENT DOES NOT MATCH ENERGY CALCS #3-Missing light in attic ( house area ) #4-Missing hose bib backflow ( by meter electrical panel ) #5- all interior door need to be installed ( share bedroom closet ) #6-seall all penetration on garage walls ( Pipe by water heater )( water lines ) #7-Please removed one piece of sotfit for inspection R316.5.12 Sheathing. Foam plastic insulation used as sheathing shall comply with Section R316.3 and Section R316.4. Where the foam plastic sheathing is exposed to the attic space at a gable or kneewall, the provisions of Section R316.5.3 shall apply. Where foam plastic insulation is used as exterior wall sheathing on framed wa R316.5.3 Attics. The thermal barrier specified in Section R316.4 is not required where all of the following apply: 1. Attic access is required by Section R807.1. 2. The space is entered only for purposes of repairs or maintenance. 3. The foam plastic insulation has been tested in accordance with Section R316.6 or the foam plastic insulation is protected against ignition using one of the following ignition barrier materials: 3.1. 11/2-inch-thick (38 mm) mineral fiber insulation. 3.2. 1/4-inch-thick (6.4 mm) wood structural panels. 3.3. 3/8-inch (9.5 mm) particleboard. 3.4. 1/4-inch (6.4 mm) hardboard. 3.5. 3/8-inch (9.5 mm) gypsum board. 3.6. Corrosion-resistant steel having a base metal thickness of 0.016 inch (0.406 mm). 3.7. 11/2-inch-thick (38 mm) cellulose insulation; or 3.8. 1/4-inch (6.4 mm) fiber-cement panel, soffit or backer board. The ignition barrier is not required where the foam plastic insulation has been tested in accordance with 5/5/25: Entire Roof Deck is covered with Foam insulation. The required coating has been applied where required. Visually verified during inspection 2490 - Insulation.
ROW - FINAL APRON (AFTER POUR) 12/17/2025 APPROVED FSLADISH
Note: 12/17/25 AT THE TIME OF THE INSPECTION, ALL MINIMUM CITY REQUIREMENTS WERE MET. IT IS THE BUILDER'S RESPONSIBILITY TO ENSURE THAT NOTHING CHANGES AFTER THIS INSPECTION IS APPROVED
ROW- FINAL SURVEY/GRADING CERTIFICATION 12/17/2025 APPROVED FSLADISH
ROW FIELD SURVEY /GRADING CERTIFICATION 12/17/2025 APPROVED FSLADISH
Note: 12/17/25 AT THE TIME OF THE INSPECTION, ALL MINIMUM CITY REQUIREMENTS WERE MET. IT IS THE BUILDER'S RESPONSIBILITY TO ENSURE THAT NOTHING CHANGES AFTER THIS INSPECTION IS APPROVED.
ROW - STORMWATER FINAL 12/17/2025 APPROVED FSLADISH
Note: 12/17/25 AT THE TIME OF THE INSPECTION, ALL MINIMUM CITY REQUIREMENTS WERE MET. IT IS THE BUILDER'S RESPONSIBILITY TO ENSURE THAT NOTHING CHANGES AFTER THIS INSPECTION IS APPROVED
ROW- PRE-APRON (PRE-POUR) 11/19/2025 APPROVED FSLADISH
Note: 11/19/25 PIPE INVERT IS GOOD AT THIS INSPECTION. BUILDER REFER TO CONCRETE (FRC) DRAWING 300,E RESIDENTIAL CULVERT DETAIL BEFORE POURING. . IF FIBERGLASS OPTION IS USED, BUILDER REQUIRED TO USE 3000 PSI CONCRETE REINFORCED WITH WWF 6X6.W1.4 MESH OR FIBERGLASS REINFORCED DOCUMENTATION OF THE ( FRC) CONTAINING THE FIBERGLASS MUST BE ATTACHED TO THE PERMIT PRIOR TO REQUESTING AN AFTER-POUR INSPECTION. 8.b. IF MESH OPTION IS USED, IT SHALL BE IN PLACE AT THE TIME OF THE PRE-POUR AT THE TIME OF THE INSPECTION READY TO POUR, IF RAIN PLEASE, BUILDER SHOULD DOUBLE CHECK SITE FOR ANY STANDING WATER. ALSO VERIFY PIPE ELEVATION HAS NOT CHANGED. NO EXPANSION JOINTS ALLOWED, AT THE TIME OF THIS INSPECTION ALL MINIMUM COPC REQUIREMENTS ARE MET. BUILDER TO BE HELD RESPONSIBLE IF, FOR WHATEVER REASON, SITE CONDITIONS CHANGE OVER TIME AFTER THE INSPECTION. IT IS THE BUILDER'S RESPONSIBILITY TO ENSURE THAT NOTHING CHANGES AFTER THIS INSPECTION IS APPROVED. AT THIS INCLUDES BUT IS NOT LIMITED TO THE CULVERT PIPE ELEVATION APPROVAL FOR THE CONCRETE POUR.
GRAVITY SEWER TEST 11/13/2025 APPROVED - AS NOTED MGIBSON
Note: THIS WAS A VIRTUAL INSPECTION 11/12/2025 - PREVIOUS INSPECTION NOTES NEED TO HAVE C/O 18 '' OFF THE FOUNDATION WALL
SEWER TIE IN 11/13/2025 APPROVED - AS NOTED MGIBSON
Note: THIS WAS APPROVED ON 11/12/25
GRAVITY SEWER TEST 11/12/2025 Disapproved - NO FEE MGIBSON
Note: NEED TO HAVE C/O 18 '' OFF THE FOUNDATION WALL
U-CROSS CONNECTION 11/12/2025 APPROVED - AS NOTED BHAINES
Note: No CC, No IRR
ELECTRIC - EARLY POWER 10/23/2025 APPROVED RSIMS
Note: *** NOTES ADDED BY RSIMS 10/23/2025 8:55:59 AM *** 10/23/25: FPL emailed to release power. Inspector Notes from Inspection 2170 7/23/24: FPL notified > approved for Temp Pole at @ 14:00.
PEP TANK INSTALLATION REQUEST 10/10/2025 APPROVED CBOWERMASTER
LATH/BRICK/ WATER BARRIER 05/14/2025 APPROVED RSIMS
Note: *** NOTES ADDED BY RSIMS 5/14/2025 2:12:16 PM *** 5/12/2025 - PREVIOUS INSPECTION NOTES 5/12/25: 1). All holes in CMU at left side of house need lath installed over holes. FBC [A]107.4 2). Silt fence on right side needs to be repaired and maintained throughout build. FBC 3307.1 3). Temporary culvert pipe needs to be repaired/cleared on right side to allow free flow of water through the swale. FBC 3303.5
LATH/BRICK/ WATER BARRIER 05/12/2025 Disapproved - NO FEE RSIMS
Note: *** NOTES ADDED BY RSIMS 5/12/2025 11:49:58 AM *** 5/12/25: 1). All holes in CMU at left side of house need lath installed over holes. FBC [A]107.4 2). Silt fence on right side needs to be repaired and maintained throughout build. FBC 3307.1 3). Temporary culvert pipe needs to be repaired/cleared on right side to allow free flow of water through the swale. FBC 3303.5
WALL SHEATHING 05/12/2025 APPROVED RSIMS
Note: *** NOTES ADDED BY RSIMS 5/12/2025 11:46:43 AM ***
INSULATION 05/05/2025 APPROVED RSIMS
Note: *** NOTES ADDED BY RSIMS 5/5/2025 1:59:10 PM *** Inspector Notes from Inspection 2420 4/22/25 1. Need to have Product approvals and Duct layout changed to show what is installed and approved by final 4/16/2025 - PREVIOUS INSPECTION NOTES 4/16/25: Incomplete inspection due to missing plans/documents. 1). Incomplete plans in box/on site. Missing plan pages, Florida product approval and Energy Calcs. FBC [A]107.3.1 2). Missing fireblocking at top of electrical breaker box framing. 2" x 4" at the top needs to be installed horizontally with all wires drilled through. FBC-R302.11. Per Manufacturer fire foam annular space cannot exceed 1/2" (FBC [A]107.4) 3). 5ft head pressure not holding. Please have stand pipe filled to the top. FBCR P2503.7 4). Please have slab at guest bathroom repaired with cement product level with slab to meet the original slab requirements listed on plans. FBC [A]107.4 5). Please have the temporary swale pipe cleared and repaired on the right side to allow free flow of water through the swale as required. FBC 3303.5 Inspector Notes from Inspection 2467 *** NOTES ADDED BY RSIMS 3/19/2025 11:06:05 AM *** 3/19/25: Please have you silt fence repaired on the rigt isde as soon as possible. FBC 3307.1
ALL ROUGH 04/22/2025 APPROVED - AS NOTED MCONTRYMAN
Note: 4/22/25 1. Need to have Product approvals and Duct layout changed to show what is installed and approved by final 4/16/2025 - PREVIOUS INSPECTION NOTES 4/16/25: Incomplete inspection due to missing plans/documents. 1). Incomplete plans in box/on site. Missing plan pages, Florida product approval and Energy Calcs. FBC [A]107.3.1 2). Missing fireblocking at top of electrical breaker box framing. 2" x 4" at the top needs to be installed horizontally with all wires drilled through. FBC-R302.11. Per Manufacturer fire foam annular space cannot exceed 1/2" (FBC [A]107.4) 3). 5ft head pressure not holding. Please have stand pipe filled to the top. FBCR P2503.7 4). Please have slab at guest bathroom repaired with cement product level with slab to meet the original slab requirements listed on plans. FBC [A]107.4 5). Please have the temporary swale pipe cleared and repaired on the right side to allow free flow of water through the swale as required. FBC 3303.5 Inspector Notes from Inspection 2467 *** NOTES ADDED BY RSIMS 3/19/2025 11:06:05 AM *** 3/19/25: Please have you silt fence repaired on the rigt isde as soon as possible. FBC 3307.1
ALL ROUGH 04/16/2025 Disapproved - NO FEE RSIMS
Note: *** NOTES ADDED BY RSIMS 4/16/2025 10:45:38 AM *** 4/16/25: Incomplete inspection due to missing plans/documents. 1). Incomplete plans in box/on site. Missing plan pages, Florida product approval and Energy Calcs. FBC [A]107.3.1 2). Missing fireblocking at top of electrical breaker box framing. 2" x 4" at the top needs to be installed horizontally with all wires drilled through. FBC-R302.11. Per Manufacturer fire foam annular space cannot exceed 1/2" (FBC [A]107.4) 3). 5ft head pressure not holding. Please have stand pipe filled to the top. FBCR P2503.7 4). Please have slab at guest bathroom repaired with cement product level with slab to meet the original slab requirements listed on plans. FBC [A]107.4 5). Please have the temporary swale pipe cleared and repaired on the right side to allow free flow of water through the swale as required. FBC 3303.5 Inspector Notes from Inspection 2467 *** NOTES ADDED BY RSIMS 3/19/2025 11:06:05 AM *** 3/19/25: Please have you silt fence repaired on the rigt isde as soon as possible. FBC 3307.1
ROOF VALLEY & METAL 03/19/2025 APPROVED - AS NOTED RSIMS
Note: *** NOTES ADDED BY RSIMS 3/19/2025 11:06:05 AM *** 3/19/25: Please have you silt fence repaired on the rigt isde as soon as possible. FBC 3307.1
WALL SHEATHING 03/04/2025 APPROVED RSIMS
Note: *** NOTES ADDED BY RSIMS 3/4/2025 12:32:55 PM *** Inspector Notes from Inspection 2340 *** NOTES ADDED BY RSIMS 2/4/2025 11:39:02 AM *** 2/4/25: Approved as noted to keep project moving. ALL MUST BE COMPLETE PRIOR TO NEXT INSPECTION. Check at next inspection. 1). Window Sill mortar beds and/or Concrete Block joints exceed the maximum thickness (sills - 1/2" / CMU joints - 3/8") per FBC-R606.3.1 Marked with orange spray paint. Inspector Notes from Inspection 2250 1/13/25 Noting that there are a few dowels placed that are not in the plans, to keep with the proper spacing. They are noted on the plans
ROOF SHEATHING / BRACES/TIES/DOWN CELL 03/04/2025 APPROVED RSIMS
Note: *** NOTES ADDED BY RSIMS 3/4/2025 12:30:53 PM *** Inspector Notes from Inspection 2340 *** NOTES ADDED BY RSIMS 2/4/2025 11:39:02 AM *** 2/4/25: Approved as noted to keep project moving. ALL MUST BE COMPLETE PRIOR TO NEXT INSPECTION. Check at next inspection. 1). Window Sill mortar beds and/or Concrete Block joints exceed the maximum thickness (sills - 1/2" / CMU joints - 3/8") per FBC-R606.3.1 Marked with orange spray paint. Inspector Notes from Inspection 2250 1/13/25 Noting that there are a few dowels placed that are not in the plans, to keep with the proper spacing. They are noted on the plans
TIE BEAM / LINTEL 02/04/2025 APPROVED - AS NOTED RSIMS
Note: *** NOTES ADDED BY RSIMS 2/4/2025 11:39:02 AM *** 2/4/25: Approved as noted to keep project moving. ALL MUST BE COMPLETE PRIOR TO NEXT INSPECTION. Check at next inspection. 1). Window Sill mortar beds and/or Concrete Block joints exceed the maximum thickness (sills - 1/2" / CMU joints - 3/8") per FBC-R606.3.1 Marked with orange spray paint. Inspector Notes from Inspection 2250 1/13/25 Noting that there are a few dowels placed that are not in the plans, to keep with the proper spacing. They are noted on the plans
FOUND SURVEY APPROVED (OFFICE) 01/22/2025 APPROVED TBAKER
MONOLITHIC SLAB 01/13/2025 APPROVED - AS NOTED MCONTRYMAN
Note: 1/13/25 Noting that there are a few dowels placed that are not in the plans, to keep with the proper spacing. They are noted on the plans
PLUMBING 1ST ROUGH UNDERGROUND 12/23/2024 APPROVED MGIBSON
GEOTECHNICAL REPORT APPROVAL (OFFICE USE) 12/20/2024 APPROVED CPISCITELLI
ELECTRIC TEMP POLE 07/23/2024 APPROVED - AS NOTED RSIMS
Note: 7/23/24: FPL notified > approved for Temp Pole at @ 14:00.

Review History

Department Status Date In Date Out
MECH COMPLETE 12/18/2025 12/18/2025
Note: Released By: CHRIS PISCITELLI - (386)986-2574 - CPISCITELLI@PALMCOASTGOV.COM
ZON COMPLETE 10/21/2025 10/21/2025
Note: Released By: LIBBY RAYBURN - - LRAYBURN@PALMCOASTGOV.COM
SW1 COMPLETE 10/21/2025 10/21/2025
Note: Released By: PARREN FLANAGAN - (386)986-2392 - PFLANAGAN@PALMCOASTGOV.COM
UTL COMPLETE 10/21/2025 10/21/2025
Note: Released By: LARRY FITZGERALD - (386)286-2041 - LFITZGERALD@PALMCOASTGOV.COM
BLD HOLD 08/14/2025 08/18/2025
Note: Held By: PETER KNAPIK - (386)986-3783 - PKNAPIK@PALMCOASTGOV.COM 1. FL# 15576.4 not a casement window
MECH COMPLETE 08/14/2025 08/15/2025
Note: Released By: CHRIS PISCITELLI - (386)986-2574 - CPISCITELLI@PALMCOASTGOV.COM
BLD COMPLETE 02/24/2025 02/27/2025
Note: Released By: PETER KNAPIK - (386)986-3783 - PKNAPIK@PALMCOASTGOV.COM
ENGIN1 COMPLETE 01/21/2025 01/22/2025
Note: Released By: TIM BAKER - (386)986-4726 - TBAKER@PALMCOASTGOV.COM FYI foundation survey was uploaded as "survey".
ZON COMPLETE 01/21/2025 01/21/2025
Note: Released By: ALISHA MOBLEY - (386)986-3751 - AMOBLEY@PALMCOASTGOV.COM
BLD COMPLETE 12/20/2024 12/31/2024
Note: Released By: JOSH MUNSON - (386)986-4736 - JMUNSON@PALMCOASTGOV.COM
BLD COMPLETE 11/12/2024 11/18/2024
Note: Released By: JOSH MUNSON - (386)986-4736 - JMUNSON@PALMCOASTGOV.COM
BLD HOLD 10/31/2024 11/05/2024
Note: Held By: JOSH MUNSON - (386)986-4736 - JMUNSON@PALMCOASTGOV.COM 1. Need shop drawing approval stamp by EOR on truss packet or truss layout.
MECH COMPLETE 10/31/2024 11/05/2024
Note: Released By: CHRIS PISCITELLI - (386)986-2574 - CPISCITELLI@PALMCOASTGOV.COM
ENGIN1 COMPLETE 10/28/2024 10/31/2024
Note: Released By: TIM BAKER - (386)986-4726 - TBAKER@PALMCOASTGOV.COM
SW1 COMPLETE 10/28/2024 10/29/2024
Note: Released By: JOHN HOWARD - - JHOWARD@PALMCOASTGOV.COM SW1 completed review is contingent on stormwater inspector's approval of the final survey. A failed final survey inspection and/or a revised site plan indicating any deviation from the approved site plan with significant change in drainage patterns and elevations negatively impacting neighboring lots, or the structure will result in a HOLD
ZON COMPLETE 10/28/2024 10/28/2024
Note: Released By: TRACEY DOAK - (386)986-3751 - TDOAK@PALMCOASTGOV.COM
BADMIN INFORMATION 10/22/2024 10/22/2024
Note: Marked INFORMATION By: BARBIE BEMBRY - (386)986-3780 - BUILDINGDIVISION@PALMCOASTGOV.COM Please indicate what the change/ update is. If this is a change to the proposed site plan, please upload as a site plan.
MECH COMPLETE 05/06/2024 05/08/2024
Note: Released By: CHRIS PISCITELLI - (386)986-2574 - CPISCITELLI@PALMCOASTGOV.COM
ENGIN1 COMPLETE 04/16/2024 04/16/2024
Note: Released By: TIM BAKER - (386)986-4726 - TBAKER@PALMCOASTGOV.COM
MECH HOLD 04/16/2024 04/17/2024
Note: Held By: CHRIS PISCITELLI - (386)986-2574 - CPISCITELLI@PALMCOASTGOV.COM Provide duct layout. Missing from new energy calc set
ELEC COMPLETE 04/16/2024 04/19/2024
Note: Released By: JOSH MUNSON - (386)986-4736 - JMUNSON@PALMCOASTGOV.COM
BADMIN INFORMATION 04/16/2024 04/16/2024
Note: Marked INFORMATION By: BARBIE BEMBRY - (386)986-3780 - BUILDINGDIVISION@PALMCOASTGOV.COM Documents/Files named incorrectly o Please rename your files in accordance with the naming convention outlined in our ‘document requirements’ located on the permit portal page http://docs.palmcoastgov.com/departments/building/online/document-requirements.pdf o It is important that all submittals follow the guidelines for efficient plan review and record retention accuracy. o You may add to your file name AFTER the above naming convention has been met. Examples Document type: Plans File name : Given sheet name A.1 / Plans Document type: Foundation Survey File name: Foundation Survey Document type: Manufactures Specifications File Name: Pool Alarm Document type: Manufactures Specifications File Name: Generator Revisions and corrections should follow the same criteria and should use the same name as the original originally identified. (no – new, revised, second submittal, updated) We recently sent an email requiring plans sheets to include a description when the design professional does not use industry standards when naming their sheets. typically, the sheet name will identify the type of sheet it is (A - architectural, M -mechanical, E - electrical, etc.) Please look at the document submittal requirements and add the description to your plan file names.
BLD COMPLETE 04/16/2024 04/22/2024
Note: Released By: JPI
BADMIN COMPLETE 04/16/2024 04/19/2024
Note: Released By: JOSH MUNSON - (386)986-4736 - JMUNSON@PALMCOASTGOV.COM
DSD CANCEL 04/16/2024 04/22/2024
SW1 COMPLETE 04/16/2024 04/16/2024
Note: Released By: TIM BAKER - (386)986-4726 - TBAKER@PALMCOASTGOV.COM
ZON COMPLETE 04/16/2024 04/16/2024
Note: Released By: TRACEY DOAK - (386)986-3751 - TDOAK@PALMCOASTGOV.COM
ENGIN1 HOLD 03/20/2024 03/21/2024
Note: Held By: TIM BAKER - (386)986-4726 - TBAKER@PALMCOASTGOV.COM Survey elevations are off by 1' and site benchmark elevation reads 00.00
BADMIN HOLD 03/19/2024 03/25/2024
Note: Held By: JOSH MUNSON - (386)986-4736 - JMUNSON@PALMCOASTGOV.COM 1. Geo Tech report needs to be digitally signed and sealed.
BLD HOLD 03/19/2024 03/25/2024
Note: Held By: JPI 1) Signature appears invalid, Document is altered ([A]107) 2) Back porch column is shown in different locations on Floor plan & Foundation Plans. ([A]107.2.1) 3) Please add Emergency Escape Openings to plans. (R311) 4) Garage Opening Reinforcement does not match detail on sheet 5. Needs the horizontal member between front door & transom specified. ([A]107.2.1) 5) Foundation Plan- Footers appear to be missing under block walls. ([A]107.2.1) 6) Roof Underlayment could not be found in the database. ([A]107.2.1) 7) Add note. Smoke alarms shall be installed not less than 3 feet (914 mm) horizontally from the door or opening of a bathroom that contains a bathtub or shower unless this would prevent placement of a smoke alarm required by Section (R314.3).
CUSVC COMPLETE 03/19/2024 03/19/2024
Note: Released By: HALEIGH HAND - - HHAND@PALMCOASTGOV.COM
ELEC HOLD 03/19/2024 03/25/2024
Note: Held By: JOSH MUNSON - (386)986-4736 - JMUNSON@PALMCOASTGOV.COM 1. All outlets in laundry need to be GFCI protected. NEC 2020 210.8 2. DW outlet can not be located behind the DW. NEC 2020 422.16 3. Need correct outlet spacing in bed 2. NEC 2020 210.52 4. Electric load calcs do not match the living space of the home.
ENGIN1 COMPLETE 03/19/2024 03/19/2024
Note: Released By: TIM BAKER - (386)986-4726 - TBAKER@PALMCOASTGOV.COM
GAS CANCEL 03/19/2024 03/22/2024
LOCATE COMPLETE 03/19/2024 03/21/2024
Note: Released By: TONI CHURCHILL - - TCHURCHILL@PALMCOASTGOV.COM
MECH HOLD 03/19/2024 03/22/2024
Note: Held By: CHRIS PISCITELLI - (386)986-2574 - CPISCITELLI@PALMCOASTGOV.COM Energy Calcs need to be signed by the owner/ owner agent below the preparer per R103.1.1.2 FBC Energy Conservation 2023 8Th edition
SW1 COMPLETE 03/19/2024 03/19/2024
Note: Released By: TIM BAKER - (386)986-4726 - TBAKER@PALMCOASTGOV.COM
ZON COMPLETE 03/19/2024 03/21/2024
Note: Released By: MICHELLE RAMOS - (386)986-3780 - MRAMOS@PALMCOASTGOV.COM
SWALE COMPLETE 03/19/2024 06/04/2024
Note: Released By: TIM BAKER - (386)986-4726 - TBAKER@PALMCOASTGOV.COM

Fees & Payments

(Permit is not ready for pickup until the permit has been processed and fees appear)
Description Amount Due Date Paid
REINSPECTION RESIDENTIAL ¤40.00 12/18/2025
CONNECTION FEES ¤1,187.26 05/10/2024
FC IMPACT FEE EMS ¤62.00 05/10/2024
IMPACT FEE FIRE ¤428.09 05/10/2024
FC IMPACT FEE LAW ENFORCEMENT ¤218.00 05/10/2024
FC IMPACT FEE LIBRARY ¤268.00 05/10/2024
IMPACT FEE PARKS ¤1,800.99 05/10/2024
IMPACT FEE SCHOOL ¤5,450.00 05/10/2024
IMPACT FEE TRANSPORTATION ¤1,862.00 05/10/2024
WATER -IRRIGATION INSPECTION ¤25.00 05/10/2024
SURCHARGE FS 533.721 ¤6.13 05/10/2024
SURCHARGE - FS 468.631 ¤9.20 05/10/2024
SW ENG - FOUNDATION SURVEY ¤20.00 05/10/2024
SW ENG INSPECTION 80 ¤80.00 05/10/2024
SW ENG PRE APRON ¤30.00 05/10/2024
SW ENG - REVIEW 20 ¤20.00 05/10/2024
SW ENG RES REVIEW 200 ¤200.00 05/10/2024
SEWER CREDIT (¤1,342.00) 05/10/2024
SEWER INSPECTION ¤25.00 05/10/2024
SEWER CAPITAL FACILITY ¤5,441.03 05/10/2024
WATER CAPITAL FACILITY FEE ¤3,994.51 05/10/2024
SITE PLAN 30 ¤30.00 05/10/2024
WATER- TURN ON ¤25.00 05/10/2024
ADJUSTMENT 50% (¤613.34) 05/10/2024
ADMINISTRATIVE RESIDENTIAL ¤30.00 05/10/2024
INSPECTION - RESIDENTIAL ¤932.25 05/10/2024
PLAN REVIEW - RESIDENTIAL ¤264.42 05/10/2024
Fees Total Due: ¤0.00 Total Paid: ¤20,493.54