I want to search for...

Permit #2024050075

Permit Details

Status: CANCEL

Parcel Id: 08-12-31-0650-000B0-0091
Block: 000B0
Subdivision: 2088 - TOWN CENTER
Job Phone: 321-338-0875
Location Address: 5650 STATE HWY 100 E
Type: IRRC - IRRIGATION COMMERCIAL
NOC: NO DOCUMENTATION
Applicant name: JOSHUA KIAH MOORE SR
Owner: TOWN CENTER COMMONS LLC

Address

1912 NIGHTFALL DRIVE

NEPTUNE BEACH, FL 32266

Lot: 0091
Contracted Stated Job Value: ¤40,000.00
Job Description: IRRIGATION SYSTEM
Type: CN

Contractor

BLUEH20 IRRIGATION & LANDSCAPING, LLC
Status Location Address State License Number Phone
INACTIVE

1745 AURORA ROAD

MELBOURNE, FL 32935

SCC131152070 (Exp: 08/31/2026) 321-848-0542

Inspection History

Type Request Date Result Inspector
PLUMBING 1ST ROUGH
PLUMBING 2ND ROUGH
PLUMBING FINAL
LDSC-LANDSCAPE/IRRIGATION FINAL

Review History

Department Status Date In Date Out
PLLA CANCEL 10/23/2024
PLUM CANCEL 10/23/2024
PLLA HOLD 05/16/2024 05/21/2024
Note: Held By: RICHARD PICATAGI - (386)986-3760 - RPICATAGI@PALMCOASTGOV.COM Provide Irrigation Legend to identify each symbol type.
PLUM HOLD 05/16/2024 05/23/2024
Note: Held By: JIM WALKER - (386)529-4112 - JWALKER@PALMCOASTGOV.COM REPEAT COMMENTS. Please respond to all comments below in letter form. If reclaimed / reuse / non-potable water is to be used for irrigation system provide the following: 1. Show location of beginning source of reclaimed / reuse / non-potable water and location of irrigation system service line. 2. Provide notes indicating piping materials specs, labeling, identification and signage details in accordance with the 2023 Florida Building Code-Plumbing Section 608.9 and Chapter 13. These are regulations governing non-potable water systems. 3. Provide note on plan indicating there will be no interconnection / cross-connection between reclaimed / reuse / non-potable water system and potable water system. If potable water is to be used for irrigation system provide the following: 1. Name Florida licensed Plumbing Contractor on permit for installation of required back-flow preventer - installation of back-flow preventers is plumbing contractor work not irrigation contractor work. 2. Show location of back-flow device connection and irrigation service line from point of connection at back-flow preventer to first valve box. 3. Provide manufacture, type and model along with location of back-flow preventer. Provide design standard of required back-flow preventer. 4. Provide note indicating backflow preventer will be tested for proper operation and labeled with tag confirming device passed inspection by third party State approved back-flow testing company.
PLLA HOLD 05/01/2024 05/08/2024
Note: Held By: RICHARD PICATAGI - (386)986-3760 - RPICATAGI@PALMCOASTGOV.COM 1. Show and label source of irrigation water, label type or water.
PLUM HOLD 05/01/2024 05/11/2024
Note: Held By: PATRICK BUCKLEY - (386)986-3786 - PBUCKLEY@PALMCOASTGOV.COM Identify source of water supply serving irrigation system - reuse / reclaimed / non-potable water or domestic potable water. If reclaimed / reuse / non-potable water is to be used for irrigation system provide the following: 1. Show location of beginning source of reclaimed / reuse / non-potable water and location of irrigation system service line. 2. Provide notes indicating piping materials specs, labeling, identification and signage details in accordance with the 2023 Florida Building Code-Plumbing Section 608.9 and Chapter 13. These are regulations governing non-potable water systems. 3. Provide note on plan indicating there will be no interconnection / cross-connection between reclaimed / reuse / non-potable water system and potable water system. If potable water is to be used for irrigation system provide the following: 1. Name Florida licensed Plumbing Contractor on permit for installation of required back-flow preventer - installation of back-flow preventers is plumbing contractor work not irrigation contractor work. 2. Show location of back-flow device connection and irrigation service line from point of connection at back-flow preventer to first valve box. 3. Provide manufacture, type and model along with location of back-flow preventer. Provide design standard of required back-flow preventer. 4. Provide note indicating backflow preventer will be tested for proper operation and labeled with tag confirming device passed inspection by third party State approved back-flow testing company.