I want to search for...
Permit #2024121074
Permit Details
Status: FINAL
| Parcel Id: 07-11-31-7024-00450-0360 |
| Block: 00450 |
| Subdivision: 7024 - |
| Job Phone: 407-937-2848 |
| Location Address: 46 PRATTWOOD LN |
| Type: WD - WINDOWS/DOORS |
| Issue Date: 12/31/2024 |
| NOC: RECORDED |
| Applicant name: JAMES SAMUEL ROWLAND |
| Owner: KRIEN LISA |
|
Address 46 PRATTWOOD LN PALM COAST, FL 32164 |
| Lot: 0360 |
| Contracted Stated Job Value: ¤21,210.00 |
| Job Description: Replacing 9 Non-Impact Windows and 2 Non-Impact Doors Size for Size |
| Type: CN |
Contractor
PWD-ORLANDO LLC
| Status | Location Address | State License Number | Phone |
| ACTIVE |
4306 SHADER RD, STE 100 ORLANDO, FL 32808 |
CBC046712 (Exp: 08/31/2026) | 407-937-2848 |
Inspection History
| Type | Request Date | Result | Inspector |
| FINAL - BUILDING MISC | 09/25/2025 | FINAL APPROVED | RSIMS |
| Note: *** NOTES ADDED BY RSIMS 9/25/2025 2:46:58 PM *** 1/15/2025 - PREVIOUS INSPECTION NOTES 1/15/25: This permit is related to three previously expired permits. My notes from permit 2024051136 still stand. Item 1: Marble sills have been removed exposing shim spacing below window frame. Solid (pressure treated) backing will need to be installed due to excessive spacing which is greater than the 1/4" max as required. FBCR R609.1 I am adding a framing inspection to check for corrections along with the foam seal prior to finishing off with a window sill. Item 2: Sliding glass doors need to be sealed on the perimeter fully. Sealant is cracking/missing in miscellaneous areas. FBC [A]107.4 6/28/2024 - PREVIOUS INSPECTION NOTES 6/28/24: 1). Living room and Dining area windows are mounted to the marble sill which does not extend all the way to the window exterior which creates a gap under the window that exceeds the 1/4" maximum spacing between rough framing and window frame. FBCR R609.1 2). Sliding glass door installation does not meet the Manufacturer's requirements for anchor spacing and anchors for screen door track & lock. FBC [A]107.4 Other previous permits directly related to this permit are 2022071257 / 2023100744 / 2024121074. | |||
| FRAMING | 09/24/2025 | CANCELLED BY APPLICANT | WEB |
| Note: 7/17/2025 - PREVIOUS INSPECTION NOTES Please resolve issues before next inspection this is for 2 windows that are not install properly window seen to be to small for the space , solid blocking add to the bottom of window , screws for bottom of window are not down complete 1/4" still over plate , items from previous inspections still pending ( replacement of windows with the right size window is advice ) 6/18/2025 - PREVIOUS INSPECTION NOTES 6/18/25: Final Inspection cannot be completed until this Framing Inspection is approved. Also, window is not finished as it is missing window sill and any trim finish to close exposed drywall edges and rough framing. FBC [A]107.4 1). Framing Inspection: plywood strips used as solid blocking need to be secured to original solid blocking with no space between original and new blocking. Code Permitted shim space is 1/4" max and must be between window frame and solid blocking. 2). Installation clip screw: Manufacturer requires 3/16" concrete anchor screw with 1-1/4" minimum embedment into CMU/concrete wall. 1/15/25: This permit is related to three previously expired permits. My notes from permit 2024051136 still stand. Item 1: Marble sills have been removed exposing shim spacing below window frame. Solid (pressure treated) backing will need to be installed due to excessive spacing which is greater than the 1/4" max as required. FBCR R609.1 I am adding a framing inspection to check for corrections along with the foam seal prior to finishing off with a window sill. Item 2: Sliding glass doors need to be sealed on the perimeter fully. Sealant is cracking/missing in miscellaneous areas. FBC [A]107.4 6/28/2024 - PREVIOUS INSPECTION NOTES 6/28/24: 1). Living room and Dining area windows are mounted to the marble sill which does not extend all the way to the window exterior which creates a gap under the window that exceeds the 1/4" maximum spacing between rough framing and window frame. FBCR R609.1 2). Sliding glass door installation does not meet the Manufacturer's requirements for anchor spacing and anchors for screen door track & lock. FBC [A]107.4 Other previous permits directly related to this permit are 2022071257 / 2023100744 / 2024121074. | |||
| FRAMING | 09/24/2025 | APPROVED | RSIMS |
| Note: *** NOTES ADDED BY RSIMS 9/24/2025 11:08:52 AM *** New inspection due to canceled inspection 7/17/2025 - PREVIOUS INSPECTION NOTES Please resolve issues before next inspection this is for 2 windows that are not install properly window seen to be to small for the space , solid blocking add to the bottom of window , screws for bottom of window are not down complete 1/4" still over plate , items from previous inspections still pending ( replacement of windows with the right size window is advice ) 6/18/2025 - PREVIOUS INSPECTION NOTES 6/18/25: Final Inspection cannot be completed until this Framing Inspection is approved. Also, window is not finished as it is missing window sill and any trim finish to close exposed drywall edges and rough framing. FBC [A]107.4 1). Framing Inspection: plywood strips used as solid blocking need to be secured to original solid blocking with no space between original and new blocking. Code Permitted shim space is 1/4" max and must be between window frame and solid blocking. 2). Installation clip screw: Manufacturer requires 3/16" concrete anchor screw with 1-1/4" minimum embedment into CMU/concrete wall. 1/15/25: This permit is related to three previously expired permits. My notes from permit 2024051136 still stand. Item 1: Marble sills have been removed exposing shim spacing below window frame. Solid (pressure treated) backing will need to be installed due to excessive spacing which is greater than the 1/4" max as required. FBCR R609.1 I am adding a framing inspection to check for corrections along with the foam seal prior to finishing off with a window sill. Item 2: Sliding glass doors need to be sealed on the perimeter fully. Sealant is cracking/missing in miscellaneous areas. FBC [A]107.4 6/28/2024 - PREVIOUS INSPECTION NOTES 6/28/24: 1). Living room and Dining area windows are mounted to the marble sill which does not extend all the way to the window exterior which creates a gap under the window that exceeds the 1/4" maximum spacing between rough framing and window frame. FBCR R609.1 2). Sliding glass door installation does not meet the Manufacturer's requirements for anchor spacing and anchors for screen door track & lock. FBC [A]107.4 Other previous permits directly related to this permit are 2022071257 / 2023100744 / 2024121074. | |||
| FRAMING | 07/17/2025 | Disapproved - NO FEE | CVANSTRAHLEN |
| Note: Please resolve issues before next inspection this is for 2 windows that are not install properly window seen to be to small for the space , solid blocking add to the bottom of window , screws for bottom of window are not down complete 1/4" still over plate , items from previous inspections still pending ( replacement of windows with the right size window is advice ) 6/18/2025 - PREVIOUS INSPECTION NOTES 6/18/25: Final Inspection cannot be completed until this Framing Inspection is approved. Also, window is not finished as it is missing window sill and any trim finish to close exposed drywall edges and rough framing. FBC [A]107.4 1). Framing Inspection: plywood strips used as solid blocking need to be secured to original solid blocking with no space between original and new blocking. Code Permitted shim space is 1/4" max and must be between window frame and solid blocking. 2). Installation clip screw: Manufacturer requires 3/16" concrete anchor screw with 1-1/4" minimum embedment into CMU/concrete wall. 1/15/25: This permit is related to three previously expired permits. My notes from permit 2024051136 still stand. Item 1: Marble sills have been removed exposing shim spacing below window frame. Solid (pressure treated) backing will need to be installed due to excessive spacing which is greater than the 1/4" max as required. FBCR R609.1 I am adding a framing inspection to check for corrections along with the foam seal prior to finishing off with a window sill. Item 2: Sliding glass doors need to be sealed on the perimeter fully. Sealant is cracking/missing in miscellaneous areas. FBC [A]107.4 6/28/2024 - PREVIOUS INSPECTION NOTES 6/28/24: 1). Living room and Dining area windows are mounted to the marble sill which does not extend all the way to the window exterior which creates a gap under the window that exceeds the 1/4" maximum spacing between rough framing and window frame. FBCR R609.1 2). Sliding glass door installation does not meet the Manufacturer's requirements for anchor spacing and anchors for screen door track & lock. FBC [A]107.4 Other previous permits directly related to this permit are 2022071257 / 2023100744 / 2024121074. | |||
| FRAMING | 06/18/2025 | Disapproved -FEE REQUIRED | RSIMS |
| Note: *** NOTES ADDED BY RSIMS 6/18/2025 12:37:36 PM *** 6/18/25: Final Inspection cannot be completed until this Framing Inspection is approved. Also, window is not finished as it is missing window sill and any trim finish to close exposed drywall edges and rough framing. FBC [A]107.4 1). Framing Inspection: plywood strips used as solid blocking need to be secured to original solid blocking with no space between original and new blocking. Code Permitted shim space is 1/4" max and must be between window frame and solid blocking. 2). Installation clip screw: Manufacturer requires 3/16" concrete anchor screw with 1-1/4" minimum embedment into CMU/concrete wall. 1/15/25: This permit is related to three previously expired permits. My notes from permit 2024051136 still stand. Item 1: Marble sills have been removed exposing shim spacing below window frame. Solid (pressure treated) backing will need to be installed due to excessive spacing which is greater than the 1/4" max as required. FBCR R609.1 I am adding a framing inspection to check for corrections along with the foam seal prior to finishing off with a window sill. Item 2: Sliding glass doors need to be sealed on the perimeter fully. Sealant is cracking/missing in miscellaneous areas. FBC [A]107.4 6/28/2024 - PREVIOUS INSPECTION NOTES 6/28/24: 1). Living room and Dining area windows are mounted to the marble sill which does not extend all the way to the window exterior which creates a gap under the window that exceeds the 1/4" maximum spacing between rough framing and window frame. FBCR R609.1 2). Sliding glass door installation does not meet the Manufacturer's requirements for anchor spacing and anchors for screen door track & lock. FBC [A]107.4 Other previous permits directly related to this permit are 2022071257 / 2023100744 / 2024121074. | |||
| FINAL - BUILDING MISC | 01/15/2025 | Disapproved -FEE REQUIRED | RSIMS |
| Note: *** NOTES ADDED BY RSIMS 1/15/2025 3:25:42 PM *** 1/15/25: This permit is related to three previously expired permits. My notes from permit 2024051136 still stand. Item 1: Marble sills have been removed exposing shim spacing below window frame. Solid (pressure treated) backing will need to be installed due to excessive spacing which is greater than the 1/4" max as required. FBCR R609.1 I am adding a framing inspection to check for corrections along with the foam seal prior to finishing off with a window sill. Item 2: Sliding glass doors need to be sealed on the perimeter fully. Sealant is cracking/missing in miscellaneous areas. FBC [A]107.4 6/28/2024 - PREVIOUS INSPECTION NOTES 6/28/24: 1). Living room and Dining area windows are mounted to the marble sill which does not extend all the way to the window exterior which creates a gap under the window that exceeds the 1/4" maximum spacing between rough framing and window frame. FBCR R609.1 2). Sliding glass door installation does not meet the Manufacturer's requirements for anchor spacing and anchors for screen door track & lock. FBC [A]107.4 Other previous permits directly related to this permit are 2022071257 / 2023100744 / 2024121074. |
Fees & Payments
(Permit is not ready for pickup until the permit has been processed and fees appear)
| Description | Amount Due | Date Paid |
| ADMINISTRATIVE - EXTENSION | ¤40.00 | 07/03/2025 |
| REINSPECTION RESIDENTIAL | ¤40.00 | 07/03/2025 |
| REINSPECTION RESIDENTIAL | ¤40.00 | 01/16/2025 |
| ADJUSTMENT 10% | (¤9.05) | 12/31/2024 |
| ADMINISTRATIVE RESIDENTIAL | ¤30.00 | 12/31/2024 |
| INSPECTION - RESIDENTIAL | ¤60.50 | 12/31/2024 |
| SURCHARGE FS 533.721 | ¤2.00 | 12/31/2024 |
| SURCHARGE - FS 468.631 | ¤2.00 | 12/31/2024 |
| Fees | Total Due: ¤0.00 | Total Paid: ¤205.45 |