I want to search for...

Permit #2026010476

Permit Details

Status: APPLY

Parcel Id: 09-12-31-2477-00000-0040
Block: 00000
Subdivision: 2477 -
Job Phone: 386-986-0426
Location Address: 250 OLD KINGS RD S
Type: CFN - COMMERCIAL FENCE
NOC: Unknown
Applicant name: JONATHON PAUL DUENAS
Owner: ANNABELLE T 250 LLC

Address

901 E MOODY BLVD

BUNNELL, FL 32110

Lot: 0040
Contracted Stated Job Value: ¤2,400.00
Job Description: 6' and 4' ft chain link fence
Type: CN

Contractor

BLUELINE PROPERTY SOLUTIONS LLC
Status Location Address Phone
INACTIVE

8 CLARENDON CT S

PALM COAST, FL 32137

386-986-0426

Inspection History

Type Request Date Result Inspector
FINAL
LDSC- LANDSCAPE FINAL
U - UTILITY COMMERCIAL FINAL

Review History

Department Status Date In Date Out
BLD HOLD 01/16/2026 01/26/2026
Note: Held By: CHRIS PISCITELLI - (386)986-2574 - CPISCITELLI@PALMCOASTGOV.COM COMMENTS BELOW PER THE 2023 FLORIDA BUILDING CODE-BUILDING (FBCB), FLORIDA BUILDING CODE-ACCESSIBILITY (FBCA), FLORIDA STATUTES (FS), FLORIDA ADMINISTRATIVE CODE (FAC) AND AUTHORITY HAVING JURISDICTION (AHJ). PLAN RE-SUBMITTAL SHALL BE ACCOMPANIED BY A RESPONSE LETTER SIGNED AND SEALED BY THE APPROPRIATE DESIGN PROFESSIONAL(S). ALL PLAN REVISIONS SHALL BE CLOUDED APPROPRIATELY. PLEASE PROVIDE PLANS. PLANS NEED TO SHOW DETAILS BELOW 1. Plan sheets need to be digitally signed, sealed and verifiable by a licensed Florida PE. F.S.471.025 2. Reference FBC 2023 code cycle on plans 107.2.1 3. Provide foundation details for posts. 107.2.1 4. Provide gate latches and hardware details at public access gates that meet reach ranges based on direction of approach (both sides of gate) and that require no grasping, pinching or turning of the wrist. Sections 308, 309.4. 404.2.7. 5. If gates are to have spring hinges and / or gate closers, provide details in accordance with Section 404.2.8, 404.2.8.1, 404.2.8.2 and 404.2.9. 6. Show landing dimensions and areas on each side of each gate. Slopes at landings at gates not to exceed 2% in any direction. Landings to be as wide as gates plus clearance beyond latch side and 48 inches in the direction of travel based on forward approach. 7. Show required maneuvering clearances at gates including minimum clear dimension beyond latch side of gates on both sides of gates based on direction of approach and swing of gates. . 8. Show minimum clear opening width at each gate of 32 inches. Section 404.2.3. 9. Provide gate detail indicating gate surfaces within 10 inches above the ground to have smooth surfaces on the push side of gate for the full width of gates. Section 404.2.10
DSD HOLD 01/16/2026 01/16/2026
Note: Held By: ALISHA MOBLEY - (386)986-3751 - AMOBLEY@PALMCOASTGOV.COM Plan shows fence going outside of the property line. Please correct site plan to show fence within the property boundary
PLLA COMPLETE 01/16/2026 01/26/2026
Note: Released By: RICHARD PICATAGI - (386)986-3760 - RPICATAGI@PALMCOASTGOV.COM
UD1 COMPLETE 01/16/2026 01/26/2026
Note: Released By: GREG DEGLER - (386)986-2384 - GDEGLER@PALMCOASTGOV.COM
DSD PENDING
BLD PENDING